14L [Industrial Equipment] Digital Frequency Conversion Temperature Control Ultrasonic Cleaning Machine For Auto Parts/Medical Devices - Manufacturer Direct

14L Industrial-grade Capacity and Structural Design

• Automotive Parts: 20-30 bearings or 50-80 screws and nuts.
• Medical Devices: 15-20 surgical instruments plus 10 biopsy forceps. It is suitable for continuous operation on small to medium - scale production lines (with a daily processing capacity of ≥20 batches).

• Inner Tank: Constructed from one-piece 304 stainless steel (3mm thick). The welds undergo X-ray flaw detection and helium mass spectrometry leak detection (with a leakage rate ≤0.05mbar・L/s). It is resistant to acids and alkalis within a pH range of 2-13, supporting highly corrosive reagents such as sodium hydroxide and alcohol.
• Outer Shell: Made of cold-rolled steel plate with electrostatic spraying (hardness ≥3H), it resists dust and moisture in industrial environments. Four sets of adjustable shock-absorbing foot pads are installed at the bottom (with a leveling accuracy of ±1mm).

3. Intelligent Industrial-level Operation

• Liquid Level Monitoring: Automatically shuts down when water is insufficient (response time < 1 second) to prevent damage to the transducers caused by idling.
• Overload Protection: Cuts off power within 0.3 seconds when the current exceeds 115% of the rated value. Combined with a temperature sensor, it continuously monitors the temperature rise in the inner tank (issues a warning when the temperature > 85°C).