【Intelligent Digital Power Adjustment】19L Ultrasonic Cleaning Machine For Eyeglasses & Dentures / Home & Commercial Use - Direct From Manufacturer

Core Technologies and Highlights of Advantages

1. Fully Digital Intelligent Power Regulation System — Output on Demand, Precise Energy Control
   0 - 100% Steplessly Adjustable Power:
   Equipped with a Digital Signal Processor (DSP), it supports fine - tuning of power at the 0.1% level. For example, when cleaning precision parts, the power can be set to 30% to prevent damage, while for degreasing hardware parts, it can operate at full power. This improves the adjustment accuracy by 5 times compared with traditional knob - type regulation.
   It can display the power waveform diagram in real - time (with a resolution of 10ms) and automatically compensate for power grid fluctuations. When the voltage fluctuates by ±10%, the power stability is ≥99%, avoiding the impact of power drift on the cleaning effect.
   100 Groups of Intelligent Recipe Storage: The 7 - inch color touch screen supports the presetting of cleaning parameters (power, frequency, time, temperature), which can be called up with one click to adapt to different workpieces. For example:

• For cleaning eyeglass lenses: 40KHz + 40% power + warm water at 35℃, which can remove oil stains without damaging the coating in 5 minutes;
• For degreasing automotive parts: 28KHz + 80% power + hot washing at 60℃, which can strip stubborn cutting fluids in 15 minutes.

Industrial - grade Durability and Safety Design

• Inner tank: Made of 304 stainless steel (2mm thick) with one - piece molding. The welds are inspected by X - ray flaw detection and helium mass spectrometry leak detection (leakage rate ≤ 0.1mbar・L/s). It is resistant to acids and alkalis with a pH range of 2 - 13, suitable for cleaning agents such as hydrochloric acid and sodium hydroxide.
• Outer shell: Cold - rolled steel plate with electrostatic powder coating (hardness ≥ 2H). It is available in black titanium and industrial gray color schemes. Four sets of 30mm height - adjustable feet are installed at the bottom to adapt to uneven ground (leveling accuracy ±2mm).