|Place of Origin:||China|
|Brand Name:||Hong Sonic|
|Minimum Order Quantity:||1 Units|
|Packaging Details:||Wooden Case Packing|
|Delivery Time:||Depend On Quantity|
|Supply Ability:||1000 Units Per Month|
|Heater:||20-95C Adjustable||Timer:||1-99H Adjustable|
|Frequency:||40KHz||Additional Function:||Filtration,Lifting,Rotating Etc|
|Material:||SUS304 Or SUS316||Ultrasonic Power:||2400W|
|Product Name:||Ultrasonic Washing Machine||Heating Power:||6KW|
Four Tank 175L Automotive Ultrasonic Cleaner For Car Engine Parts With Heater
How Automotive Ultrasonic Cleaner Works?
Ultrasonic cavitation or the implosion of millions of minute bubbles against surfaces immersed in the cleaning solution safely blasts away all surface contaminants.
The bubbles are created by ultrasonic transducers bonded to the cleaner’s tank. A widely used ultrasonic frequency is 40,000 cycles per second (40 kHz) delivered by Hongsonic series of cleaners.
Detail Information Of HS-4048:
|Specifications for ultrasonic cleaner HS-4048|
|Each Tank capacity||175L|
|Each Tank size||700*500*500mm|
|Tank material||SUS304 Or SUS316|
|Control||Outside generator, more stable|
|Optional||Oil filter system, pneumatic lift, rinsing tank, etc.|
|Cleaning Process||Ultrasonic Cleaning+Ultrasonic Rinsing+Rinsing+Drying
What Car Parts Can You Clean In Automotive Ultrasonic Cleaner?
Ultrasonic cleaner for car parts cleaning is one of the best designed and most essential tool for auto mechanic.
With a high quality ultrasonic cleaning equipment in a garage, all the cleaning tasks can now be completed in a matter of few minutes, which actually required few hours.
Overall, the process is made quick, safe and professional when an ultrasonic cleaning device is being used for cleaning these automotive parts.
The best thing about using these ultrasonic cleaning systems is, you are free to go and complete your other productive tasks when the cleaning task is being done professionally by an automated machine. You can come back after a while and pick the cleaned parts when they are ready to assemble.
Although you can clean range of automotive parts (of a car,motorcycle or a truck) using this device, but the main engine components or parts which can be speedily cleaned by using these ultrasonic cleaning systems include:
Small needle valves, jets, orifices, and ports of a carburetor; intake and exhaust ports or a cylinder head; pistons;injector nozzle; ring; pinion gears and much more can be cleaned and made just like brand new within few minutes.
Removing the accumulated oil sludge, varnish and carbon deposits, from these engine parts, manually by hand can be a tedious and long process. But using an ultrasonic parts cleaner makes all this a breeze. And for this reason ultrasonic cleaning device is considered one of the best tools in the auto mechanic’s garage.
How to Clean Engine Parts?
A recommended ultrasonic cleaning solution is elma tec clean A4 concentrate, an alkaline formulation for metal, glass, ceramics, plastic and rubber. It removes oil, grease, combustion residues, soot and other organic contaminants when diluted to 2 to 5% with water.
Here is an example of a cleaning cycle using the Elmasonic E Plus ultrasonic cleaner:
Add water to the tank fill line and the required amount of elma tec clean A4 to make a 5% concentration. (A 2.5 liter container of concentrate dilutes to approximately 9 gallons of solution.)
Turn on the cleaner and allow it to operate for approximately 20 minutes. This degassing step drives off entrapped air and must be taken each time fresh cleaning solution is prepared.
Prior to cleaning set the thermostat to 70˚C and turn the unit on. While the solution warms place parts in the mesh cleaning basket in such a way that they do not come in contact with each other.
Lower the basket into the cleaning solution, place the lid on the tank to conserve heat and reduce noise, and set the timer for 40 minutes. Cleaning time depends on the condition of the parts and can be adjusted either way.
At the end of the cycle remove the component(s) from the bath. If they need further cleaning run them through another cycle. Do not reach into the hot cleaning solution. Instead remove the basket if you want to inspect or rearrange the parts.
Allow the parts to flash dry before reassembly.
If rust is a concern add 0.05 to 0.5% elma-KS to the cleaning solution. This provides a protective coating on a molecular level for temporary corrosion protection.